Warning: Trying to access array offset on false in E:\WWW\html\user.php on line 117 Badiru, Adedeji B. (Air Force Institute of Technology, Dayton, Ohio, USA) Systems Engineering Models 9780367780135
Systems Engineering Models, Badiru, Adedeji B. (Air Force Institute of Technology, Dayton, Ohio, USA)
Автор: Luenberger David G. Название: Introduction to dynamic systems : ISBN: 0471025941 ISBN-13(EAN): 9780471025948 Издательство: Wiley Рейтинг: Цена: 28601.00 р. 40859.00-30% Наличие на складе: Есть (1 шт.) Описание: Integrates the traditional approach to differential equations with the modern systems and control theoretic approach to dynamic systems, emphasizing theoretical principles and classic models in a wide variety of areas.
Автор: Ata Allah Taleizadeh Название: Inventory Control Models with Motivational Policies ISBN: 3319892010 ISBN-13(EAN): 9783319892016 Издательство: Springer Рейтинг: Цена: 17074.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book examines the different motivational policies used for inventory management. In many competitive markets, sellers use motivational policies to encourage the customers to buy more and these kinds of strategies are used as competitive tools. This book brings together all the motivational policies for lot sizing decisions and offers a useful guide for inventory control. Each chapter applies deterministic inventory models such as economic order quantity (EOQ) and economic production quantity (EPQ), but also stochastic models for the motivational policy covered. The book begins exploring quantity discounts such as all-unit and incremental discounts. It then looks at delayed payment or trade credit policies that are applied by many suppliers and/or wholesalers to increase their sales. The motivational policies covered in the following chapters are dedicated to advance payment/prepayment schemes and also special sales offered by retailers to increase sales levels or decrease the inventory level. Finally the book concludes with a review of announced price increases, which persuades customers to buy a product at the current price, rather than paying more for it in the future. Inventory Control Models with Motivational Policies should be useful for professionals working on supply chains, but also researchers in operations research and inventory management.
Автор: Alessandro Annarelli Название: The road to servitization. ISBN: 3030122506 ISBN-13(EAN): 9783030122508 Издательство: Springer Рейтинг: Цена: 10366.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Moreover, the book exhibits the selection and implementation policies for product service systems in different industrial environments.Providing comprehensive information on the product service system phenomenon, this book is essential reading for researchers and practitioners in the product service and business industries.
Автор: Michela Rossi; Giorgio Buratti Название: Computational Morphologies ISBN: 3319869604 ISBN-13(EAN): 9783319869605 Издательство: Springer Рейтинг: Цена: 15855.00 р. Наличие на складе: Нет в наличии.
Описание: This book represents an invaluable and up-to-date international exchange of research, case studies and best practice to tackle the challenges of digital technology, computer-aided design, 3D modeling, prototyping machines and computational design. With contributions from leading experts in the field of industrial design and cultural heritage, it is split into three parts. The first part explores basic rules of design, design models and shape grammar, including the management of complex forms, and proves that innovative concepts may be derived from organic models using generative design. The second part then investigates responsive design, describing how to manage the changing morphologies of buildings through pre-programmed mechanisms of real-time response and feedback embedded in inhabitable spaces. Lastly, the third part focuses on digital heritage and its capability to increase the interaction and manipulation of object and concepts, ranging from augmented reality to modeling generative tools. The book gathers peer-reviewed papers presented at the eCAADe (Education and Research in Computer-Aided Architectural Design in Europe) Regional International Symposium, held in Milan, Italy, in 2015.
Автор: Lauer, Fabien Bloch, Gerard Название: Hybrid system identification ISBN: 303000192X ISBN-13(EAN): 9783030001926 Издательство: Springer Рейтинг: Цена: 17074.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: ?Hybrid System Identification helps readers to build mathematical models of dynamical systems switching between different operating modes, from their experimental observations. It provides an overview of the interaction between system identification, machine learning and pattern recognition fields in explaining and analysing hybrid system identification. It emphasises the optimization and computational complexity issues that lie at the core of the problems considered and sets them aside from standard system identification problems. The book presents practical methods that leverage this complexity, as well as a broad view of state-of-the-art machine learning methods.
The authors illustrate the key technical points using examples and figures to help the reader understand the material. The book includes an in-depth discussion and computational analysis of hybrid system identification problems, moving from the basic questions of the definition of hybrid systems and system identification to methods of hybrid system identification and the estimation of switched linear/affine and piecewise affine models. The authors also give an overview of the various applications of hybrid systems, discuss the connections to other fields, and describe more advanced material on recursive, state-space and nonlinear hybrid system identification.
Hybrid System Identification includes a detailed exposition of major methods, which allows researchers and practitioners to acquaint themselves rapidly with state-of-the-art tools. The book is also a sound basis for graduate and undergraduate students studying this area of control, as the presentation and form of the book provides the background and coverage necessary for a full understanding of hybrid system identification, whether the reader is initially familiar with system identification related to hybrid systems or not.
Описание: This book presents high-quality original contributions on the fashion supply chain. A wide spectrum of application domains are covered, processing of big data coming from digital and social media channels, fashion new product development, fashion design, fashion marketing and communication strategy, business models and entrepreneurship, e-commerce and omni-channel management, corporate social responsibility, new materials for fashion product, wearable technologies.The contents are based on presentations delivered at IT4Fashion 2017, the 7th International Conference in Business Models and ICT Technologies for the Fashion Supply Chain, which was held in Florence, Italy, in April 2017, and at IT4Fashion 2018, the 8th edition of the same conference, which was held in Florence, Italy, in April 2018. This conference series represents a targeted response to the growing need for research that reports and debates supply chain business models and technologies applied to the fashion industry, with the aim of increasing knowledge in the area of product lifecycle management and supply chain management in that industry.
Автор: Badiru Название: Systems Engineering Models ISBN: 1138577618 ISBN-13(EAN): 9781138577619 Издательство: Taylor&Francis Рейтинг: Цена: 19140.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents a comprehensive compilation of practical systems engineering models. The application and recognition of systems engineering is spreading rapidly, however there is no book that addresses the availability and usability of systems engineering models.
Автор: Skomski, Ralph Название: Simple Models of Magnetism ISBN: 0199655391 ISBN-13(EAN): 9780199655397 Издательство: Oxford Academ Рейтинг: Цена: 9552.00 р. Наличие на складе: Поставка под заказ.
Описание: Models of magnetism have been pivotal in the understanding and advancement of science and technology. The book is the first one to cover the field as a whole, complementing a rich literature on specific models of magnetism. It is written in an easily accessible style, with a limited amount of mathematics, and covers a wide range of phenomena.
Название: Products That Last ISBN: 9063695225 ISBN-13(EAN): 9789063695224 Издательство: Laurence King Рейтинг: Цена: 4552.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Products that Last starts where most books on product development end. This new edition contains new examples and insights from recent publications. From the perspective of designers and entrepreneurs, once a product has been designed, produced and sold, it disappears beyond the newness horizon.
This book introduces the role of Rapid Prototyping Techniques within the product development phase. It deals with the concept, origin, and working cycle of Rapid Prototyping Processes with emphasis on the applications. Apart from elaboration of engineering and non-engineering applications, it highlights recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models. Special emphasis has been provided to the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence the book also elaborates on the mass manufacturing of rapid prototyped products. This includes casting and rapid tooling. The book concludes with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same.
With globalization of market and advances in science and technology, the life span of products has shortened considerably. For early realization of products and short development period, engineers and researchers are constantly working together for more and more efficient and effective solutions. The most effective solution identified has been usage of computers in both designing and manufacturing. This gave birth to the nomenclatures CAD (Computer Aided Designing) and CAM (Computer aided Manufacturing). This was the initiation that ensured short product development and realization period. Researchers coined the concept as Rapid Prototyping. In contrast to Prototyping, Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive or subtractive layer manufacturing" technology.
The first methods for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus for early product realization or physical products for actual testing.
This book is expected to contain Seven Chapters. Chapter 1 would explain product life cycle and the product development phase in the same, introducing role of Rapid Prototyping Techniques in Product development phase. Chapter 2 would deals with the concept, origin and working cycle of Rapid Prototyping Processes. Chapter 3 would concentrates on the applications of Rapid Prototyping Technology. Apart from elaboration of engineering and non-engineering applications, it also elaborates on recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models etc. Chapter 4 would introduce the various Rapid Prototyping systems available worldwide. The chapter also introduces the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS hence ensuring low rejection rate by human body. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence Chapter 5 would elaborates on the mass manufacturing of rapid prototyped products. This includes Casting and Rapid Tooling. Chapter 6 would deal with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. As the product realization is primarily dependent on various softwares which are required to be understood for better accuracy so the concluding chapter of the book i.e. Chapter 7 would explain some software associated with the various techniques.
Автор: Faraway, Julian J. Название: Linear models with python ISBN: 1138483958 ISBN-13(EAN): 9781138483958 Издательство: Taylor&Francis Рейтинг: Цена: 14545.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Linear Models with Python offers up-to-date insight on essential data analysis topics, from estimation, inference, and prediction to missing data, factorial models, and block designs. Numerous examples illustrate how to apply the different methods using Python
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
