Solid (Bio)mechanics: Challenges of the Next Decade, Sommer
Автор: Matthew R.W. Brake Название: The Mechanics of Jointed Structures ISBN: 3319568167 ISBN-13(EAN): 9783319568164 Издательство: Springer Рейтинг: Цена: 28051.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book introduces the challenges inherent in jointed structures and guides researchers to the still-open, pressing challenges that need to be solved to advance this critical field. The authors cover multiple facets of interfacial mechanics that pertain to jointed structures: tribological modeling and measurements of the interface surfaces, constitutive modeling of joints, numerical reduction techniques for structures with joints, and uncertainty quantification and propagation for these structures. Thus, the key subspecialties addressed are model reduction for nonlinear systems, uncertainty quantification, constitutive modeling of joints, and measurements of interfacial mechanics properties (including tribology). The diverse contributions to this volume fill a much needed void in the literature and present to a new generation of joints researchers the potential challenges that they can engage in in order to advance the state of the art.
Clearly defines internationally recognized challenges in joint mechanics/jointed structures and provides a comprehensive assessment of the state-of-the-art for joint modeling;
Identifies open research questions facing joint mechanics;
Details methodologies for accounting for uncertainties (due both to missing physics and variability) in joints;
Explains and illustrates best-practices for measuring joints' properties experimentally;
Maximizes reader understanding of modeling joint dynamics with a comparison of multiple approaches.
Micromechanics of the Deformation and Failure Kinetics of Semicrystalline Polymers.- Stress-relaxation Behavior of Poly(methyl methacrylate) (PMMA) Across the Glass Transition Temperature.- The Effect of Stoichiometric Ratio on Viscoelastic Properties of Polyurea.- Dynamic Properties for Viscoelastic Materials over Wide Frequency Range.- Spatio-temporal Principal Component Analysis of Full-field Deformation Data.- Time-dependent Crack Initiation and Propagation From Notches in Ultrahigh Molecular Weight Polyethylene.- Master Creep Compliance Curve for Random Viscoelastic Material Properties.- Processability and Mechanical Properties of Polyoxymethylene in Powder Injection Molding.- Constitutive Response of Electronics Materials.- Analytical and Experimental Protocols for Unified Characterizations in Real Time Space for Isotropic Linear Viscoelastic Moduli From 1-D Tensile Experiments.- High Temperature Multiaxial Creep-fatigue and Creep-ratcheting Behavior of Alloy 617.- Metastable Austenitic Steels and Strain Rate History Dependence.- Measurement Uncertainty Evaluation for High Speed Tensile Properties of Auto-body Steel Sheets.- Effect of Water Absorption on Time-temperature Dependent Strength of CFRP.- Stress and Pressure Dependent Thermo-Oxidation Model for poly (Bis)Maleimide Resins and Composites.- Comparison of Sea Water Exposure Environments on the Properties of Carbon Fiber Vinylester Composites.- Low-density, Polyurea-based Composites: Dynamic Mechanical Properties and Pressure Effect.- Haynes 230 High Temperature Thermo-mechanical Fatigue Constitutive Model Development.- Temperature and Strain Rate Effects on the Mechanical Behavior of Ferritic Stainless Steels.- Modeling and Simulation in Validation Assessment of Failure Predictions for High Temperature Pressurized Pipes.- Unified Constitutive Modeling of Haynes 230 for Isothermal Creep-Fatigue Responses.
Описание: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2018 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length ScalesExtreme Environments & Environmental EffectsSoft MaterialsDamage, fatigue and FractureInhomogeneities & InterfacesViscoelasticityResearch in Progress
Описание: 1 Cracking and Durability of Composites in a Marine Environment.- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617.- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS.- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers.- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology.- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique.- 7 Bio-based Composites as Thermorheologically Complex Materials.- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder.- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test.- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation.- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX.- 12 Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments.- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces.- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites.- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane.- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material.- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method.- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel.- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests.- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds.- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material.- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor.- 23 Back Stress in Modeling the Response of PEEK and PC.- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers.- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin.- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests.- 27 Characterization of Fiber Composites at Lower Strain Rates.
Описание: Challenges in Mechanics of Time-Dependent Materials, Mechanics of Biological Systems and Materials, and Micro-and Nanomechanics, Volume 2 of the Proceedings of the 2021 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the second volume of four from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length Scales Extreme Conditions & Environmental Effects Damage, Fatigue and Fracture Structure, Function and Performance Rate Effects in Elastomers Viscoelasticity & Viscoplasticity Research in Progress Extreme Nanomechanics In-Situ Nanomechanics Expanding Boundaries in Metrology Micro and Nanoscale Deformation MEMS for Actuation, Sensing and Characterization 1D & 2D Materials Cardiac Mechanics Cell Mechanics Biofilms and Microbe Mechanics Traumatic Brain Injury Orthopedic Biomechanics Ligaments and Soft Materials
Описание: Challenges in Mechanics of Time-Dependent Materials, Mechanics of Biological Systems and Materials, and Micro-and Nanomechanics, Volume 2 of the Proceedings of the 2021 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the second volume of four from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length Scales Extreme Conditions & Environmental Effects Damage, Fatigue and Fracture Structure, Function and Performance Rate Effects in Elastomers Viscoelasticity & Viscoplasticity Research in Progress Extreme Nanomechanics In-Situ Nanomechanics Expanding Boundaries in Metrology Micro and Nanoscale Deformation MEMS for Actuation, Sensing and Characterization 1D & 2D Materials Cardiac Mechanics Cell Mechanics Biofilms and Microbe Mechanics Traumatic Brain Injury Orthopedic Biomechanics Ligaments and Soft Materials
Автор: Pauli Pedersen; Martin P. Bends?e Название: IUTAM Symposium on Synthesis in Bio Solid Mechanics ISBN: 9048151791 ISBN-13(EAN): 9789048151790 Издательство: Springer Рейтинг: Цена: 39895.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Proceedings of the IUTAM Symposium held in Copenhagen, Denmark, 24-27 May 1998
Автор: Vinson, Jack R. Название: Behaviour of Structures Composed of Composite Materials ISBN: 1402009046 ISBN-13(EAN): 9781402009044 Издательство: Springer Рейтинг: Цена: 13677.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Written to educate the engineering reader in the various aspects of mechanics for using composite materials in the design and analysis of composite structures and products. This book features areas that deal with manufacture, micromechanical properties, structural design, joints and bonding, and introduction to composite design philosophy.
Автор: Kachanov, M., & Sevostianov, I. Название: Micromechanics of Materials, with Applications ISBN: 3319762036 ISBN-13(EAN): 9783319762036 Издательство: Springer Рейтинг: Цена: 26832.00 р. Наличие на складе: Нет в наличии.
Описание: This book on micromechanics explores both traditional aspects and the advances made in the last 10–15 years. The viewpoint it assumes is that the rapidly developing field of micromechanics, apart from being of fundamental scientific importance, is motivated by materials science applications. The introductory chapter provides the necessary background together with some less traditional material, examining e.g. approximate elastic symmetries, Rice’s technique of internal variables and multipole expansions. The remainder of the book is divided into the following parts: (A) classic results, which consist of Rift Valley Energy (RVE), Hill’s results, Eshelby’s results for ellipsoidal inhomogeneities, and approximate schemes for the effective properties; (B) results aimed at overcoming these limitations, such as volumes smaller than RVE, quantitative characterization of “irregular” microstructures, non-ellipsoidal inhomogeneities, and cross-property connections; (C) local fields and effects of interactions on them; and lastly (D) – the largest section – which explores applications to eight classes of materials that illustrate how to apply the micromechanics methodology to specific materials.
Автор: Foa Torres, Luis E. F. Название: Introduction to graphene-based nanomaterials ISBN: 1108476996 ISBN-13(EAN): 9781108476997 Издательство: Cambridge Academ Рейтинг: Цена: 14573.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book provides an introduction to the electrical and transport properties of graphene and other two-dimensional nanomaterials. Fully updated from the first edition, the authors have added chapters on other two-dimensional materials, spin-related phenomena, and an improved overview of Berry phase effects.
Автор: Kolymbas, Dimitrios Название: A Primer on theoretical soil mechanics ISBN: 1009210335 ISBN-13(EAN): 9781009210331 Издательство: Cambridge Academ Рейтинг: Цена: 7918.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Multitudes of aspects of theoretical soil mechanics and an alternative theory for constitutive modelling, the theory of barodesy, are introduced in this novel title. Conceptual discussions on coding these concepts are presented in geotechnical engineering, also applicable in other disciplines such as mining and chemical engineering as well.
Автор: Anand, Lallit Название: Introduction to mechanics of solid materials ISBN: 0192866087 ISBN-13(EAN): 9780192866080 Издательство: Oxford Academ Рейтинг: Цена: 7073.00 р. Наличие на складе: Поставка под заказ.
Описание: Aimed at beginner to mid-level undergraduate students across the many branches of engineering, this textbook aims to provide a unified presentation of the major concepts in Solid Mechanics, including the deformation, flow, and fracture of solid materials.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
