Описание: The work of the RILEM Technical Committee (TC -236 BBM) was dedicated to the study of construction materials made from plant particles. It considered the question whether building materials containing as main raw material recyclable and easily available plant particles are renewable.
Описание: This book presents the work done by the RILEM Technical Committee 274-TCE. It focuses on the estimation of the parameters which are necessary to properly design earthen constructions. It provides a compilation of the value classically obtained for the key parameters of earthen materials, a pedagogical presentation of the main testing procedures for earthen materials, their advantage and their drawback and an overview of most standards on earthen materials, whatever their origin and their language. The book is divided into eight chapters. After a general introduction on earthen materials and constructions, the state of the art on the material characterisation technics, the assessment of hygrothermal performance, the mechanical behaviour, seismic resistance and the durability will be presented, each in a dedicated chapter. On the basis of these last chapters, a critical review of the standards which are used for earthen material will be presented in the last chapter. The last chapter is dedicated to the analysis of the environmental potential of earth-based building materials.
Описание: This book is intended for periodontal residents and practicing periodontists who wish to incorporate the principles of moderate sedation into daily practice. Comprehensive airway management and rescue skills are then documented in detail so that the patient may be properly managed in the event that the sedation progresses beyond the intended level.
Автор: Shi, Caijun (hunan University, China) Yuan, Qiang (central South University, Hunan, China) He, Fuqiang (xiamen University Of Technology, China) Hu, Xi Название: Transport and interactions of chlorides in cement-based materials ISBN: 1138492701 ISBN-13(EAN): 9781138492707 Издательство: Taylor&Francis Рейтинг: Цена: 26030.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Chloride-induced corrosion crucially affects RC durability. This research monograph covers mechanisms, testing methods, physico-chemical interactions with cement hydrates, chloride binding isotherms, measurement of penetration, factors affecting chloride transport, and modelling and prevention.
Автор: Liew, Mohd Shahir Название: Smart Nanoconcretes And Cement-Based Materials ISBN: 012817854X ISBN-13(EAN): 9780128178546 Издательство: Elsevier Science Рейтинг: Цена: 31665.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Smart Nanoconcretes and Cement-Based Materials: Properties, Modelling and Applications explores the fundamental concepts and applications of smart nanoconcretes with self-healing, self-cleaning, photocatalytic, antibacterial, piezoelectrical, heating and conducting properties and how they are used in modern high-rise buildings, hydraulic engineering, highways, tunnels and bridges. This book is an important reference source for materials scientists and civil engineers who are looking to enhance the properties of smart nanomaterials to create stronger, more durable concrete.
Описание: The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.
Описание: Introduction.- Self-tapping screws as reinforcement for structural timber elements.- Glued-in rods as reinforcement for timber structural elements.- Fiber-reinforced polymers as reinforcement for timber structural elements.- Nanocomposites as reinforcement for timber structural elements.- Reinforcement of Timber Structures: Standardization towards a new section for EC 5.- Seismic Reinforcement of Traditional Timber Structures. Reinforcement of Traditional Timber Frame Walls.- Reinforcement of Light-Frame Wood Structures.- Reinforcement of Historic Timber Roofs.- Retrofitting of traditional timber floors.- Reinforcement of Traditional Carpentry Joints.
Описание: The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.
Описание: By presenting the work of the RILEM Technical Committee 245-RTE, the book provides an overview of the existing techniques for the reinforcement of timber elements, joints and structures. It consists of two parts: part I examines state-of-the-art information on reinforcement techniques, summarizes the current status of standardization, and covers STS, GiR, FRP and nanotechnology. In part II several applications of reinforcement are discussed: these include traditional structures, traditional timber frame walls, light-frame shear walls, roofs, floors, and carpentry joints. The book will benefit academics, practitioners, industry and standardization committees interested in the reinforcement of existing timber elements, joints and structures.
Part I. Characterization of binder-aggregate interaction.- Development of Failure Master Curve for Asphalt Mastics Characterization, by P. Teymourpour, H. U. Bahia.- Semi-automatic evaluation of the degree of bitumen coverage on bitumen-coated aggregates, by R. Lamperti, C. Lantieri, C. Sangiorgi, G. Bitelli, A. Simone.- An Advanced Low Temperature Rheological and Fracture Test Method for Bitumen Purchase Specifications and Pavement Performance Prediction: 4-mm DSR/ABCD, by M. J. Farrar, S. Kim, T. Pauli, J. P. Planche.- Microstructure-Based Visco-Elastoplastic Continuum Model of Asphalt Concrete, by M. H. Zahabi, M. M. Karimi, N. Tabatabaee.- Estimation of appropriate filler quantity in asphalt mix from microscopic studies, by A. Kuity, A. Das.- A mineralogical approach of the interactions between bitumen, clay and water in hot mix asphalt (HMA), by C. W. Chen, V. Gaudefroy, M. Duc, Y. Descantes, F. Hammoum, J. P. Magnan.- Part II. Innovative testing of bituminous binders, additives and modifiers.- Storage stability of bituminous binders reinforced with nano-additives, by E. Santagata, O. Baglieri, L. Tsantilis, G. Chiappinelli.- Ageing performances of asphaltite modified bitumens.- comparisons with equivalent petroleum bitumens, by A. Themeli, E. Chailleux, F. Farcas, C. Chazallon, B. Migault, G. Didelet.- The Interaction of Polyphosphoric Acid with Bituminous Binders, by H. Soenen, S. Heyrman, X. Lu, P. Redelius.- LIBS: An innovative laboratory technique for the characterisation of bituminous material, by H. Martin.- Rheological Evaluation of Short- and Long-Term Performance for Warm Mix Asphalt (WMA)Binders, by M. Sadeq, E. Masad, H. Al-Khalid, O. Sir, D. Little.- Rheological Characterization of Asphalt Binders and Mixtures Modified with Carbon Nanotubes, by H. Wang, J. Yang, M. Gong.- Part III. Durability and aging of asphalt pavements.- Bitumen / Aggregate affinity - Rilem Round Robin Test on rolling bottle Test, by L. Porot, J. Besamusca, H. Soenen, A. Apeagyei, J. Grenfell, D. Sybilski.- Study on the ageing behavior of South American bitumen, by S.A. Mohan, J.L.M. Voskuilen, S.A. Firtoe.- Asphalt mixture sensitivity to water and frost, by M. Maliszewski, A. Zofka, D. Maliszewska, D. Sybilski.- Using Highly Oxidant Gas for Simulating Long-Term Ageing of Asphalt Mix Specimens in the Lab, by D. Steiner, B. Hofko, M. Hospodka, F. Handle, L. Eberhardsteiner, J. Fьssl, H. Grothe, R. Blab.- Methods for analyzing the chemical mechanisms of bitumen aging and rejuvenation with FTIR spectrometry, by P. Mikhailenko, A. Bertron, E. Ringot.- LEAB-PA, a half warm Porous Asphalt can increase the lifetime, by G. Gaarkeuken, M. Oosterveld, M.L.M. Sprenger, J.L.M. Voskuilen.- Part IV. Mixture design and compaction analysis.- Production of hot-mix asphalt with PMB: compactability and mechanical behavior characterization, by R. Micaelo, A. Gameiro, L. Quaresma, L. Picado-Santos.- Compaction of Open-Graded HMAs evaluated by a fuzzy clustering technique, by A. Amadore, G. Bosurgi, O. Pellegrino, G. Sollazzo.- Effects of anisotropy on performance of HMA specimens due to roller compaction, by B. Hofko, R. Blab.- Reliance of pavement texture characteristics on mix-design and compaction process, by G. Cantisani, A. D'Andrea, P. Di Mascio, G. Loprencipe.- Coloured asphalt pavements: mix design and laboratory performance testing, by N. Piйrard, J. De Visscher, S. Vansteenkiste, A. Vanelstraete.- Evaluation of Air Voids in Reinstatement Materials for Footways, by I. Artamendi, B. Allen, C. Allpress, P. Sabin, P. Phillips.- Part V. Advanced characterization of interlayer systems.- Inter-laboratory Shear Evaluation of Reinforced Bituminous Interfaces, by G. Ferrotti1, A. D'Andrea, M. Maliszewski, M. N. Partl, C. Raab, C. Sangiorgi, F. Canestrari.- Comparison of interlayer bond behavior due to ageing, by C. Raab, J. Grenfell, A.O. Abd El Halim, M. N. Partl.- Investigation of Dilatancy Effects on Asphalt Interface Shear Strength, b
Описание: This book examines the state-of-the-art on plants and fibres as building materials for low cost construction, emphasizing their use, properties, fabrication, new procedures and future developments. It makes available research results on new techniques for fibre reinforcement and their use in concrete, stabilized clay and other matrices. Procedures
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
